A managed service provider (MSP) security audit is an independent review of how the MSP itself protects the tools, accounts and data it uses to run its clients’ environments. You pass it by proving, with records, that access is controlled, changes are logged and problems get fixed. Credential and privileged-access control is where most of that proof lives, so start there.
This guide is for MSPs preparing to be audited, and for the businesses, enterprises and agencies that hire an MSP and want to know what a good audit should show them.
Table of Contents
ToggleTL;DR
- An MSP audit examines the provider’s own procedures, tools and access, and samples how those controls operate inside client environments. It is not the same as auditing one client’s network.
- The auditor should be independent of the people who run the systems. The scope should cover inventories, patching, logging, accounts and permissions, encryption, backups and recovery.
- Evidence beats policy. Prepare asset inventories, access records, logs, backup records and incident-response plans before the auditor asks.
- SOC 2, HIPAA and PCI DSS each split duties between provider and client. Write that split into the contract and into the audit scope.
- Findings need severity ratings, an owner and a validated fix. The audited organization stays responsible for remediation.
What an MSP security audit actually is
The Canadian Centre for Cyber Security defines network security auditing as an independent examination of IT controls, security systems, and risk-mitigation policies and procedures. The goal is to find weaknesses and check regulatory requirements. Its guide lists SOC reports, NERC CIP and PCI DSS as examples of frameworks an audit can measure against.
An MSP audit applies that idea to the provider. The auditor looks at the MSP’s procedures, tooling and administrative access. Where the MSP’s controls run inside client environments, the auditor usually reviews the MSP’s standard and samples records from those environments, rather than testing every client (OC Security Audit).
This differs from three things people confuse it with:
- A vulnerability scan finds known technical flaws on devices.
- A penetration test tries to break in.
- An audit is broader. According to ConnectWise’s IT security audit guide, it evaluates the wider environment, processes, user behavior and policy enforcement as well as technical risk.
Scans and tests feed an audit. They do not replace it.
Why the MSP is audited at all
An MSP holds the keys to many networks. A single stolen administrator credential at the provider can open every client it serves. That is why clients, insurers and regulators ask for evidence of the MSP’s own controls, and why many MSP contracts now require an audit or an attestation report.
For the client, the audit answers a plain question: if my provider is compromised, how far can an attacker get, and would anyone notice? For the MSP, a clean audit is also a sales asset, because it shortens security questionnaires and supports requirements from regulated clients.
Who should perform the audit
Independence is the main rule. The Canadian Centre recommends qualified IT professionals with security and network-management backgrounds who do not manage the systems being audited. If the engineer who configured the firewall also signs off on the firewall, the audit proves little.
In practice that means one of three arrangements:
- An external auditor or assessor for formal reports and client-facing assurance.
- A separate internal team for practice reviews between formal audits.
- A client-appointed assessor when a contract gives the client audit rights.
For U.S. federal work, the GAO’s 2024 audit manual says information-system control assessments are generally performed by auditors with technical expertise and experience, with suitably trained and supervised staff handling specific tasks. NIST’s assessment guide, SP 800-53A, lists the roles involved in assessments: system owners, common-control providers, security and privacy officers, assessors and auditors. If you serve government agencies, expect these roles to appear in your audit plan.
What the audit should cover
The Canadian Centre’s scope list is a solid baseline for any provider: inventories, patching, logging, approved connections, policies, accounts and permissions, encryption, backups and recovery, and bring-your-own-device controls (source). ConnectWise adds asset classification, endpoint and network security, incident response and privileged-user activity.
The GAO’s 2024 manual groups controls into categories that include security management, access controls, configuration management, segregation of duties and contingency planning. Put together, an MSP audit usually asks these questions:
| Area | What the auditor wants to see |
|---|---|
| Asset inventory | Every device, application, cloud service and account you manage, with a classification |
| Access and identity | Who can reach client systems, how they sign in, and how access is removed |
| Privileged accounts | Separate administrator accounts, approval and logging of elevated actions |
| Patching and configuration | Patch status, change records, baseline configurations |
| Logging and monitoring | Central logs with a common time source, retention, alert review |
| Encryption and backup | Encryption of data at rest and in transit, tested restores |
| Incident response | A written plan, roles, and evidence it was exercised |
| Segregation of duties | No single person able to request, approve and conceal a change |
One detail that trips up providers: the Canadian Centre says audit logs should use a common time source, and it recommends synchronizing network devices to central time servers (source). Logs that disagree on the time cannot reconstruct an incident.
Access control is the center of gravity
Most audit findings at MSPs trace back to credentials: shared administrator passwords, unrotated service accounts, access that survived an employee’s departure, and no record of who used which client login. Our guide to privileged user access control walks through how to structure this, and our cybersecurity checklist for MSPs turns the core controls into a list you can work through before the auditor arrives.

How the audit runs, step by step
The sequence is consistent across frameworks. ConnectWise describes it as defining scope and objectives, inventorying assets, assessing risks and vulnerabilities, reviewing policies and controls, comparing findings with benchmarks or regulations, documenting findings and remediation, and presenting results to stakeholders (source). Here is what each stage takes and where it goes wrong.
1. Define scope and objectives
Decide which systems, processes and clients are in scope, and which standard you are measured against. The mistake is scope that is too narrow to be credible or so wide that nobody can evidence it. Name the framework in writing before work starts.
2. Build the inventory
List hardware, software, cloud services, accounts and network devices. Gaps here become findings later, because an unlisted system is an unmanaged system. Include the tools your own staff use to reach clients, such as remote-access software, ticketing and password storage.
3. Assess risk
Rank what could go wrong and how badly. Rating by impact on clients, not only by technical severity, makes the later remediation order defensible.
4. Review controls and collect evidence
This is where the auditor tests that controls operate. ConnectWise recommends supplementing automated scans with manual checks, log reviews and interviews (source). Expect to be asked to show an example, not to describe a policy.
5. Compare against the standard
The auditor maps what they saw to the framework’s requirements and notes where evidence is missing or inconsistent.
6. Report and present
You receive findings with ratings and recommendations, and a readout for leadership and, where required, clients.
The evidence pack to prepare
Audits slow down when evidence has to be hunted. Assemble these before kickoff, drawing on the list in the ConnectWise guide:
- Inventory of hardware, software, cloud services, accounts and network devices, with classifications.
- Written security policies, with approval dates and owners.
- Firewall, endpoint, patching and access-management records.
- Logs, plus backup and retention information.
- Incident-response plans and records of any tests.
- A named person who answers auditor requests and tracks follow-ups.
An internal practice review a few weeks ahead is the cheapest way to find the gaps. Fix what you can and document what you cannot fix yet, with a date.
SOC 2, HIPAA and PCI DSS: who owes what
This is where MSP audits get confusing, because the same client environment can fall under several frameworks and the duties differ by role. Treat the following as orientation, not legal advice. Your lawyer or compliance adviser should confirm how a given regulation applies to your contracts.
SOC 2. This is an attestation report from an independent CPA firm on controls at a service organization. A white paper on SOC reporting notes that the framework was designed for entities such as data centers, IT managed services and SaaS vendors. The report covers the MSP’s own controls. Clients rely on it as evidence about you.
HIPAA. According to a technology-law firm’s overview for MSPs, HIPAA applies when you work with healthcare clients or their business associates. Your main obligations include signing business associate agreements, protecting protected health information and conducting regular risk assessments. The healthcare client remains the covered entity, but the MSP carries its own legal duties once it touches patient data.
PCI DSS. The same overview lists PCI DSS among the frameworks that apply to payment environments. The practical rule is to document which PCI requirements the MSP performs on the client’s behalf and which stay with the client, so neither side assumes the other is handling them.
CMMC. For defense contractors, the picture has changed. A 2025 analysis of the final rule says certain external service providers may be included in a contractor’s assessment rather than needing a separate certification in every case. The treatment depends on what data the provider handles.
The common thread is a written responsibility split. For every control, the contract and the audit scope should say whether the MSP, the client or both operate it, and where the evidence lives.

What is new for U.S. government work
The GAO’s 2024 Federal Information System Controls Audit Manual supersedes the 2009 revision and applies to engagements beginning on or after October 1, 2024. It expands guidance on planning, testing and reporting of information-system controls assessments. If you support federal agencies or their auditors, check that your control documentation maps to the current manual.
Turning findings into fixes
A report is only useful if it drives change. Document each finding with a severity rating, supporting evidence and an actionable recommendation, then prioritize by risk impact and client obligations. Track remediation and validate that each fix works (ConnectWise).
Two points on ownership. First, the audited organization is responsible for remediation, not the auditor. India’s national cyber-security audit guidance states this plainly and calls for follow-up audits after issues are closed. Second, for client-facing issues, share the remediation plan with the client. A finding that is acknowledged, owned and dated reads far better than one that is hidden.
A simple tracker works: finding, severity, owner, due date, evidence of closure, retest date.
Where we fit
The controls auditors test hardest are the ones around credentials and identity. We offer an MSP password manager and passwordless MFA for managed service providers, so that access to client systems is handled in one managed place rather than in shared spreadsheets or browser memory. Our network security audit tools and network security assessment checklist pair well with the evidence pack above. If you are choosing a provider rather than being one, our CISA-aligned tests for vetting MSPs give you questions to ask.
Perspective
When we look at how an MSP audit goes wrong, it is rarely a missing firewall. It is access: who has the keys to which client, and can you prove it. An auditor cannot take your word that administrator logins are controlled. They want to see the record.
That is why we build around credentials. A password manager built for MSPs, with passwordless MFA in front of privileged accounts, gives you a single place where access is granted, changed and removed. That is the evidence trail an auditor asks for, and it is far easier to produce when it is created as a side effect of daily work than when it is reconstructed the week before the audit.
Our advice: start the audit preparation with your identity and access controls, and build the rest of the evidence pack around them.
Mike
Make access evidence easy to produce
If your next audit is on the calendar, begin with credentials. Our MSP password manager and passwordless MFA are designed to keep privileged access organized and recorded, and you can see the full range on our resources and product page.

For the checklists behind the controls in this guide, read our cybersecurity checklist for MSPs, which covers ten core controls you can prove.
FAQ
How often should an MSP have a security audit?
Most MSPs run a formal audit or attestation annually, with internal practice reviews in between. Run an extra review after major changes such as a new tool stack, an acquisition or a significant incident. Contract terms and the framework you follow may set a required frequency, so check both.
Is an MSP security audit the same as a penetration test?
No. A penetration test tries to break in and reports what worked. An audit is broader: according to ConnectWise, it evaluates the environment, processes, user behavior and policy enforcement as well as technical risk. Test results can be evidence inside an audit.
Can the MSP audit itself?
An internal review is useful for preparation, but a formal audit should be done by people who do not manage the systems being examined, as the Canadian Centre for Cyber Security recommends. Use internal reviews to find and fix gaps, and an independent party to confirm.
Who fixes the problems an audit finds?
The audited organization does. Auditors report and recommend, and the owner of each system closes the finding. Plan a follow-up check afterward to confirm the fix holds (NCERT guidance).
What should a client ask its MSP about audits?
Ask which framework the MSP is audited against, who performs the audit, what the scope includes, and which controls the MSP operates in your environment versus which you operate. Ask also how findings are tracked to closure.
Sources
- ITSAP.80.086 Network Security Auditing, Canadian Centre for Cyber Security
- MSP Security Audit, OC Security Audit
- How to conduct an IT security audit, ConnectWise
- GAO-24-107026, Federal Information System Controls Audit Manual
- NIST SP 800-53A Rev. 5, Assessing Security and Privacy Controls
- Comprehensive Cyber Security Audit, NCERT India
- CMMC Final Rule: Does My MSP or CSP Need to be Compliant?, Pivot Point Security
- Compliance Regulations Every MSP Must Know, TechLawyers
- SOC 1 vs. SOC 2 white paper, SOC Reports




Password Manager
Identity Theft Protection

Team / Business
Enterprise
MSP

